mRNA 很可能携带三维遗传信息

The forming mechanism of the three - dimensional structures of proteins，i.e.the mechanism of protein folding，is a basic problem in molecular biology which is still unsolved unitl now. In which a core problem is whether there is the three – dimensional genetic information that decide the three - dimensional structures of proteins. However, the research on this field has mot yet been reported. Recently，we made a comparative study on the folded structures of more than 70 mature messeneger RNAs (mRNAs) and the three - dimensional structures of the proteins encoded by them，it has been found that there exist marked correspondences between their featured structures in the following aspects: 1.The number of the structural units. An RNA molecule can form a secondary structure(stem and loop structure) by the folding and the base pairing of itself. The elementary structural unit of an RNA secondary structure is hairpin(or compound hair pin).The regular structural unit in the secondary structure of a protein is # alpha # - helix or #beta# - sheet . We have found that the hairpin number in the secondary structure of each mature mRNA is equal or approximately equal to the number of the regular secondary structural unis of the encoded protein. 2 .Turning region. Turn is a main structrual element in the secondary structure of a protein, which decides the backbone orientation of a protein molecule to some extent .Our analysis shows that the nucleotide sequence segments in an mRNA which encode the turns of the corresponding protein are overall situated in the turning regions of the mRNA secondary structure such as haipin，bulge loop or multibaranch loops. 3 .The arrangement of structural elements in space. In order to understand the backbone orientation of an RNA molecule and the arangement of its structural elements in space，we have modeled the three一dimensional structure of the mRNA molecule on SGI workstation based on its secondary structure.The result shows that the spatial arrangement of most of the nucleotide sequence segments encoding the structural elements of a protein is consistent with that of these stretural exements in the protein. For instance，the nucleotide sequences corresponding to each pleated sheet of a # beta # - sheet structure are close to each other in the mRNA secondary stucture and in the three - dimensional structure，although some of the nucleotide segments are far apart from each other in the one - dimensional sequence. For another instance，the two triplet codons of cysteines which form a disulphide bridge geneal1y are very close to each other in the mRNA folded structure. In addition，we also analyzed the locations of the codons proline - coding and the distrbution of the nucleotide sequences #alpha# - helix - coding in the folded structures of mRNAs . Some distribution laws have been found. All of these results suggest that the transfer of the genetic information from mRNA to protein not only is one – dimensional but also is three - dime ns ional. That is，there exists the genetic information that decide the three - dimensional structures of proteins. To a certain extent，we could say that the mRNA folding detemines the protein folding. Based on these results，it would be possible to predict the three - dimensional structures of proteins from the primary，secondary and tertiary structures of the m RNAs at a higher accuracy.And more important is that a new clue has been provided to uncover the“spatial coding" of the genetic information.

Stability and molecular modeling of triplex DNA inhibiting DNA binding protein binding to the core promoter of hepatitis B virus.

Two three-dimensional structure models of the 21nt oligodeoxyribonucleotides, CPI (G3TG-2TGT2G5TG2TGT) and CP3 (TGTG2TGST2GTG2TG3), were constructed by InsightII (MSI) software in IRIS Indigo2 (SGI) workstation using the crystal structure of TAT tripler formation as the template. The initial structures subsequently were minimized by molecular mechanics. The final structures were believed as the dominant conformation. The results showed that the energy of CP1 is lower than that of CP3, and the former is more stable than the latter. Moreover, the results further proved that the 21nt oligodeoxyribo-nucleotide CP1 stably combines with the core promoter (Cp) fragment of hepatitis B virus (HBV) to form a tripler DNA, and CP1 specifically inhibits a specific cellular factor (DNA binding protein) binding to Cp fragment. These results indicated that specific repression of gene transcription of HBV DNA might be possible by tripler-formation DNA.

SNPNB: analyzing neighboring-nucleotide biases on single nucleotide polymorphisms (SNPs)

SNPNB is a user-friendly and platform-independent application for analyzing Single Nucleotide Polymorphism NeighBoring sequence context and nucleotide bias patterns, and subsequently evaluating the effective SNP size for the bias patterns observed from the whole data. It was implemented by Java and Perl. SNPNB can efficiently handle genome-wide or chromosome-wide SNP data analysis in a PC or a workstation. It provides visualizations of the bias patterns for SNPs or each type of SNPs.

Effect of dopant concentration on photocatalytic activity of TiO2 film doped by Mn non-uniformly

The thin films of TiO2 doped by Mn non-uniformly were prepared by sol-gel method under process control. In our preceding study, we investigated in detail, the effect of doping mode on the photocatalytic activity of TiO2 films showing that Mn non-uniform doping can greatly enhance the activity. In this study we looked at the effect of doping concentration on the photocatalytic activity of the TiO2 films. In this paper, the thin films were characterized by UV-vis spectrophotometer and electrochemical workstation. The activity of the photocatalyst was also evaluated by photocatalytic degradation rate of aqueous methyl orange under UV radiation. The results illustrate that the TiO2 thin film doped by Mn non-uniformly at the optimal dopant concentration (0.7 at %) is of the highest activity, and on the contrary, the activity of those doped uniformly is decreased. As a comparison, in 80 min, the degradation rate of methyl orange is 62 %, 12 % and 34 % for Mn non-uniform doping film (0.7 at %), the uniform doping film (0.7 at %) and pure titanium dioxide film, respectively. We have seen that, for the doping and the pure TiO2 films, the stronger signals of open circuit potential and transient photocurrent, the better photocatalytic activity. We also discusse the effect of dopant concentration on the photocatalytic activity of the TiO2 films in terms of effective separation of the photon-generated carriers in the semiconductor. (C) Versita Warsaw and Springer-Verlag Berlin Heidelberg. All rights reserved.

Separation and determination of organogermanium compounds by ion chromatography

For nearly three decades, organogermanium compounds have become increasingly of interest owing to their extensive physiological and pharmaceutical activity. In this paper, two new high performance ion chromatographic methods for separation and determination of three kinds of organogermanium compounds beta-carboxyethylgermanium sesquioxide (I), beta-(alpha-methyl)-carboxyethylgermanium sesquioxide (II) and d-(beta-carboxyethyl)germanium hydroxide (III) were proposed. A Dionex DX-300 ion chromatograph equipped with a Dionex FED-II pulsed electrochemical detector (conductivity mode), and a Dionex AI-450 chromatography workstation was employed. The separation was achieved by using ion-exchange or ion-exclusion mechanism. The detection limits(S/N=3, expressed as germanium) for the three compounds were all below sub- mu g/mL level. The methods have been applied to the analysis of tonic oral drinks, and the average recoveries for the three compounds range from 95 - 108%. The results obtained were in agreement with those of hydride generation atomic fluorescence spectrometry (HG-AFS).

高性能机器人控制系统的研究

本文介绍了高性能机器人控制器的研制情况.该系统具有较高的控制精度,可完成对机器人和多个外部轴的协调控制.为便于国内用户使用,实现了中文界面功能键驱动的汉字编程示教盒.为适应机器人生产线的需要,提供了丰富的联网功能和生产线监控诊断功能.目前该系统已用于新松公司的6kg工业机器人产品中.

汽车混流总装线投产排序优化研究

汽车混流总装线上交替装配不同型号的汽车产品,不同型号的汽车在同一装配工位上装配的零部件可能不同,如果不对车型的投产顺序加以优化排序,连续投入一种相同的车型,会使同一个工位的零部件消耗率严重不均衡。为了使各装配工位的零部件消耗率达到均匀化和平准化,本文采用模拟退火优化算法,对车型上线序列进行优化,最后的实例验证表明算法是可行的。

宽频带地震数据采集系统的研制

The seismic data acquisition system is the most important equipment for seismic prospecting. The geophysicists have been paying high attention to the specification of the equipment used in seismic prospecting. Its specification and performance are of great concerned to acquire precisely and accurately seismic data, which show us stratum frame. But, by this time, limited by the technology, most of the Broad-band Seismic Recorder (BSR) for lithosphere research of our country were bought from fremdness which were very costliness and maintained discommodiously. So it is very important to study the seismic data acquisition system.The subject of the thesis is the research of the BSR, several items were included, such as: seismic data digitizer and its condition monitor design.In the first chapter, the author explained the significance of the implement of BSR, expatiated the requirement to the device and introduced the actuality of the BSR in our country.In the second chapter, the collectivity architecture of the BSR system was illustrated. Whereafter, the collectivity target and guideline of the performance of the system design were introduced. The difficulty of the system design and some key technology were analyzed, such as the Electro Magnetic Compatibility (EMC), system reliability technology and so on.In the third chapter, some design details of BSR were introduced. In the recorder, the former analog to digital converter (ADC) was separated from the later data transition module. According to the characteristic of seismic data acquisition system, a set high-resolution 24-bit ADC chip was chosen to the recorder design scheme. As the following part, the noise performance of the seismic data channel was analyzed.In the fourth chapter, the embedded software design of each board and the software design of the workstation were introduced. At the same time the communication protocol of the each module was recommendedAt the last part of this thesis, the advantages and the practicability of the BSR system design were summarized, and the next development items were suggested.